yeep.me 100 Manual De Instrucciones página 18

Error codes:
N° Meaning
2 Brake problem
6 Battery voltage too low
7 Engine problem
8 Accelerator problem
9 Controller problem
10 Loss of internal connection
(data reception)
11 Loss of internal connection
(data transmission)
12 BMS (Battery Management
System) failure
13 Headlight breakdown
If the device is not running smoothly:
This can happen when you overload the engine while the battery is not fully
charged. In such a case, it is necessary to press the accelerator more slowly
and especially to check that the battery is fully charged.
Can the battery be replaced?
Yes, however the device has been designed to have its battery replaced only
by a professional.
Action to be taken
Discontinue use. Consult your retailer or the customer
service at support_uk@yeep.me and provide the
corresponding error code
Recharge using original charger supplied. If the
problem persists, discontinue use and consult your
dealer or customer service at: support_uk@yeep.me,
quoting the error code
Discontinue use. Consult your dealer or the customer
service at support_uk@yeep.me, quoting the error code
Consult your dealer or customer service at
support_uk@yeep.me, quoting the error code.
Do not drive at night or in the dark without having
carried out repairs.
18