Getting Started; Low Battery Indication - brennenstuhl WID 550 Instrucciones De Servicio

GETTING STARTED

Button placement
1. CHANNEL - scrolls through remote
channels 1-3
2. ALARM/ (AM/PM)/(C/F) - toggles
between C and F 12 and 24 hour
format, turns alarm on/off; clears
temperature alarm presets
3. MODE/SNOOZE - scrolls through time, alarm and
temperature alarm set points (high/low); activates
alarm snooze
4. UP/HOUR/MAX - scrolls
through hours; shows
maximum temperature
5. DOWN/MINUTE/MIN -
scrolls through minu-
tes; show minimum
temperature
6. LCD display
7. SET: enter to House code and Channel setting mode
8. C/F: change between C or F, change channel and
house code
9. Battery compartment
10. Socket for external sensor probe.
11. Wall Mount Holder & Table Stand
GETTING STARTED
Battery installation
1. Remove battery cover
2. 2 AA size batteries (WID 550)
3. 2 AA size batteries (FS 40 H)
4. Insert between terminals
observing proper polarity
then replace cover

LOW BATTERY INDICATION:

Low battery indication will be indicated on the receiver (for
both indoor & outdoor). On transmitter,
7 8
11
10
1+4
will be displayed
3 2 1 5 4
6
9
2
1+4
3
13
6