Naxa NHS-2007 Manual De Operación página 6

2.1 Mounting on wood walls
You may use
2 pieces screws
(Included)
1.Use a pencil to make 2 marks 27.13" apart for the mounting screws.
2.Drill the supplied screws directly into the marks on the wall, allowing
0.3" of the screws to extend from the wall.
3.Make sure the screws are firm and stable, then hang the sound bar from
the mounting screws.
2.2 Mounting on dry wall
: l l a w n e d o o w e h t n o g n i t n u o M 2 . 2
You may use
1.Use a pencil to make 2 marks 27.13" apart for the mounting screws.
2.Use a 7/32" bit to drill 2 holes at the marks on the wall.
3.Push the supplied plastic inserts into the drilled holes. If necessary,
gently tap them into place with a hammer.
4.Screw the supplied screws into the inserts, allowing 0.3" of the screws
to extend from the wall.
5.Make sure the screws are firm and stable, then hang the sound bar from
the mounting screws.
2 pieces screws
(Included)
(1)
2 pieces plastic inserts
(Included)
5
(2)