Introduction & Warranty - V-TAC VT-525 Instrucciones De Instalación

INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installing and keep this manual handy for future reference. If you
have any another query, please contact our dealer or local vendor from whom you have purchased the
product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date
of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to incorrect removal and installa-
tion of the product. This product is warranted for manufacturing defects only.
CAUTION
1. Please strictly follow the instructions for use;
2. Do not replace the parts and do the transformation of product;
3. Battery is empty state, please charge more than 36hours before using;
4. Connect power but light does not work, please check whether lamps are properly connected to the mains;
5. Please strictly use the Emergency kit according to the wiring diagram before connection and pay attention
to reverse connection;
6. Please pay attention to the battery electrodes should be connected in right way, which is used to measure
electricity;
7. This Emergency kit is only suitable for use in indoor;
WIRE DIAGRAM
Caution: Please cut off the power when installation!
Switch
Battery
EMERGENCY KIT
VT-518, VT-525
Live
Neutral
GND
Live
LED Driver
Neutral
ENGLISH
WEEE Number: 80133970
LED
Panel Light
LED Panel Light
LED Driver
Test button
LED Indicator