EMU SHADE PRO Manual Del Usuario página 19

COMPONENTS AND SCREWS INCLUDED IN THE SHADE UMBRELLA PRO ART.995 996:
A. UMBRELLA STAND: The SIDE POST (2) of the SHADE PRO must be assembled to the base with the help of the
UMBRELLA STAND (A), fixed to the base with n.5 SCREWS (B). The plate of the UMBRELLA STAND (A) of diam. 145
mm and height 10 mm has 5 holes on which to insert five screws.
B. SCREWS: Five (5) countersunk head screws (B) are used to attach the UMBRELLA STAND (A) of the umbrella to the
BASE (1).
ACCESSORY COMPONENENTS:
C. TILE (optional): The tile is 500X500X40 mm in size and weighing 25 kg and is recommended by the manufacturer.
D. BASE: The BASE art.929 / B8 is made of treated steel for external use and is the housing of the ballast tiles.
E. BASE COVER: It is made of bent sheet steel, and it is included in the 929 / B8 base.
C. TILE
.
WIND RESISTANCE GUIDELINES FOR SHADE PRO UMBRELLA:
Light to moderate winds.
Once the SHADE PRO umbrella has been correctly installed, it is suitable for use in light to moderate
wind conditions in the position with the sheet open. Please follow these guidelines:
1. When the wind becomes stronger or before uncertain and worrying weather conditions, the umbrella
must be closed, lowered and tied to the side pole.
2. The umbrella must be kept in a closed position and tied to the central post when not in use.
3. Before or during extremely severe weather conditions, it is advisable to remove and protect the entire
SHADE PRO umbrella including the structure indoors.
A. UMBRELLA STAND
D. BASE
B. TPS M10X20 SCREW
10501320
E. BASE COVER
18