EMU SHADE PRO Manual Del Usuario página 27

Attach the adhesive LED
bars on the lower face of the
4 diagonal splints of the
umbrella, in correspondence
with the channel on the lower
part of the tube that makes
up the splint.
H
Position the LED bar 100 mm from the top
end of the splint tube, making the adhesive
part stick to the metal surface to prevent the
electrical cable from bending excessively
when closing the umbrella.
P
Place the transparent covers in
correspondence of the previously
installed LED bars. The covers snap into
place by pushing them into the channel
of the batten tube, starting at one end.
26