Power Supply - Brigmton BBS-200 Manual De Instrucciones

18. LCD ON/OFF button
19. Speaker
7
11
12
Side view of receiver
20. Brightness controller
21. Volume controller
22. AV out: Audio/Video output jack
23. Earphone jack
24. Power ON/OFF switch
25. 9V power adapter plug
13
Rear view of receiver
-4-
8
9
10
-5-
26. Battery compartment
Setting up
Before you make the connection:
Always make sure the unit ON/OFF switch is in the OFF position.
Set the channel switches on the front of the camera (CH. Sel.) and the
front of receiver (CH.) to the same channel.

Power supply

The device use either 3 batteries (AA Size) or power adapter included with
it.
- + -
+ - +
Open the battery compartment cover in the direction of the arrow
Insert batteries so their (+) and minus (-) ends are facing as shown in
the illustration.
Close the battery compartment cover; make sure the battery
compartment cover is locked secure.
Never mix old batteries with new ones.
Remove batteries from the camera it you do not plan to use if
for a period of time.
!
When the low power LED indicator of camera of receiver light,
that indicated the battery power is failure, please renew
battery for function guarantee.
Using Power adapter
Plug one end of the provided power adapter into a wall outlet and the other
end into the side of camera (7.5V power adapter plug) or the side of
receiver (9V power adapter plug)
- +
+ -
-6-