RocketFish RF-PRACDC Guia Del Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3 Connect the selected tip to the end of the output cable
making sure that the pins on the tip are aligned with the
holes in the cable. Make sure that the tip is pushed all the
way into the output cable's connector.
4 Connect the CLA cable to the DC-in connector on the
power supply, then plug the CLA into the CLA socket in
your vehicle.
5 Turn off your laptop or put it into Suspend or Standby
mode.
6 Plug the cable into the laptop.
7 Insert the CLA into the socket provided in your vehicle.
Power is supplied to your laptop or other mobile device.
RF-TRMS
7

Publicidad

Tabla de contenido
loading

Tabla de contenido