Delete Files; Deleting All - CONCORD Eye-Q VGA Guia De Inicio Rapido

DELETE FILES / SOFTWARE INSTALLATION GUIDE

DELETE FILES

Deleting One
1. Turn on the camera.
2. Press the Mode button repeatedly until the icon (
3. Press the Shutter button to confirm mode selection.
4. Press the Shutter button again. The last stored file will be deleted from the memory.

Deleting All

1. Turn on the camera.
2. Press the Mode button repeatedly until the icon (
3. Press the Shutter button to confirm mode selection. The icon (
Counter will start changing in circle and blinking at the same time.
4. Within 5 seconds, press and hold the Shutter button until 00 is shown on the LCD. All stored pictures/
video clips will be deleted from the memory.
SOFTWARE INSTALLATION GUIDE
1. Make sure that your camera is not connected to the computer.
2. Make sure the computer is powered on and Windows 98SE, ME, 2000 or XP is running.
3. Close any other applications or software you may be running.
4. Insert the supplied CD-ROM into the CD-ROM drive. The installer will pop up automatically.
Note: If the installer does not appear automatically, double click 'My Computer', and then double click the
CD-ROM driver.
5. Select the language, then click [OK].
6. Click on the Camera Driver or Software that you would like to
install to start installation.
7. Follow the on-screen wizards to complete the installation. For
details, please refer to the electronic User's Guide.
DOWNLOADING THE FILES FROM THE CAMERA TO YOUR COMPUTER
Note: Do not connect the camera to the computer before successful installation of the camera s drivers
and software.
1. Connect the camera to your PC by plugging one end of the USB cable into your camera and the other
end into the USB port of your computer.
• The camera will automatically be powered on. The camera's LCD panel will display [PC].
All manuals and user guides at all-guides.com
) is blinking.
4
) is blinking.
) will stop blinking, but the Frame