Publicidad
Idiomas disponibles
Idiomas disponibles
01.
To power on the reader, press and hold the
center button on your AccuPoint Advanced Next Gen.
Enter user name and password if required.
02.
Select Standard Test (when using a site plan)
or Quick Test for general sampling. Under standard
testing, select the correct site to be tested.
03.
Sample your site
by "drawing" a 4" x 4"
square. With a vertical
and horizontal back-
and-forth motion
"fill" in the square.
Consistency
is critical.
05.
Mix gently
for two seconds.
NOTE: do not shake.
04.
Hold the sampler
vertically and fully
depress to activate.
Note: the sampler must be
held vertically.
06.
With the instrument
held upright, press the
eject button and insert
the sampler.
08.
The RLU score
will display along with
a symbol for pass,
marginal or fail.
09.
On the results
screen, users have the
option to enter notes for
that result, retest that site,
or move to the next site in
their plan.
07.
Depress the
sampler all the way
down and close
the door.
Note: keep instrument
upright while the sample
is being read.
2:15 PM
8/1/20
<Guest>
RESULT PASS:0
USER
<Guest>
TIME
2:14 PM 8/1/20
PLAN
TEST
AREA
PROCESSING
GROUP LINE 1
SITE
CONVEYOR BELT 1
Notes*
Next Site
Retest
Publicidad
