Names Of Parts; Front; Rear - Tascam AK-CC25 Manual Del Usuario

Names of parts

Front

SSD/HDD slot power/access indicator
1
When powered, it will stay lit blue if the SSD/HDD is not
being accessed.
This indicator blinks orange when the drive is being
accessed.
USB 3.0 port
2
Use the USB cable included with the DA-6400/DA-6400dp to
connect this to a computer.
Use this port when exchanging data between a computer
and the SSD/HDD drive.
When connected to a USB 2.0-compatible port, it will only
support USB 2.0 transmission speeds.
6
TASCAM AK-CC25

Rear

Main unit connector
3
Insert the SSD/HDD case into the SSD/HDD SLOT on the
front of the DA-6400/DA-6400dp to connect this connector
to the DA-6400/DA-400dp.
CAUTION
•
Only connect this to a DA-6400/DA-6400dp.
Connecting to another device that has a SATA I/F could
cause damage.
•
After removing the SSD/HDD case from the DA-6400/
DA-6400dp, attach the static electricity protection cover
to this connector.