Care; Dock/Usb/3.5-Mm Connections - Paradigm AERA Manual Del Usuario

Controlling Music Playback from your AERA via iTunes
To control playback from your AERA, go to the iTunes Preferences and
choose Edit, select "Allow iTunes audio control from remote speakers".

Dock/USB/3.5-mm Connections

The Dock and USB connector on your AERA supports Charge and
Playback on the following models:
iPod touch (1st, 2nd, 3rd, and 4th generation)
iPod nano (6th generation)
iPhone 4S
iPhone 4
Your AERA can charge and play your Apple device using the 30-pin
Connector on its top section or the USB socket on the rear panel. In order
to use the USB socket on the rear panel you need to use the Apple USB
cable that was supplied with your Apple device.
To begin playback via the Dock connector jack or USB socket,
1. Stop playback from any device using the AirPlay connection.
2. Carefully connect your Apple device to the AERA's 30-Pin Dock
Connector or connect the Apple USB cable to your AERA's USB
socket and then to your Apple device.
10
All manuals and user guides at all-guides.com
3.5-mm Stereo Connections
Your AERA can also be used with any analog portable media device
that supports a 3.5-mm connection. Simply connect a 3.5mm cable to
your AERA's 3.5mm Stereo Connector and then to the device (cable not
included).
To enable the Dock or USB Socket
Press the Dock/USB button on the onboard user interface, the LED
indicator on the front of your AERA will ash Red.
To Enable the 3.5mm Stereo Connector
Press the Dock/USB button on the onboard user interface again to
access the 3.5mm connector. When in 3.5mm mode the LED indicator
on the front of AERA will ash Purple.
iPhone 3GS
iPhone 3G
iPad 2
iPad
Dock/ USB /
3.5-mm