Reinigung Und Wartung; Technical Data; Electrical Safety; Safety In The Workplace - physa PHY-400TH-1 Manual De Instrucciones

Calentador de toallas
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
6
ACHTUNG: Nach dem Ausschalten bleibt das Gerät
einige Zeit warm - seien Sie vorsichtig, insbesondere
beim Entfernen von Handtüchern!
Wenn das Gerät längere Zeit nicht benutzt wird,
ziehen Sie auch den Stecker aus der Steckdose.

3.4. REINIGUNG UND WARTUNG

a)
Vor jeder Reinigung und Einstellung, dem Austausch
von Zubehör oder wenn das Gerät nicht benutzt
wird, muss der Netzstecker gezogen werden und das
Gerät vollständig abkühlen.
b)
Verwenden Sie zur Reinigung der Oberfläche
ausschließlich Mittel ohne ätzende Inhaltsstoffe.
c)
Lassen Sie nach jeder Reinigung alle Teile gut
trocknen, bevor das Gerät erneut verwendet wird.
d)
Bewahren Sie das Gerät an einem trockenen, kühlen,
vor Feuchtigkeit und direkter Sonneneinstrahlung
geschütztem Ort auf.
e)
Es ist verboten, das Gerät mit einem Wasserstrahl zu
besprühen oder in Wasser zu tauchen.
f)
Es darf kein Wasser über die Belüftungsöffnungen
am Gehäuse ins Innere des Geräts gelangen.
g)
Die Belüftungsöffnungen sind mit Pinsel und
Druckluft zu reinigen.
h)
Benutzen Sie einen weichen Lappen zur Reinigung.
i)
Zum Reinigen darf man keine scharfen und/
oder Metallgegenstände (z.B. Drahtbürste oder
Metallspachtel) benutzen, weil diese die Oberfläche
des Materials, aus dem das Gerät hergestellt ist,
beschädigen können.
j)
Reinigen Sie das Gerät nicht mit säurehaltigen
Substanzen.
Medizinische
Geräte,
Verdünner,
Kraftstoff, Öle oder andere Chemikalien können das
Gerät beschädigen.
ENTSORGUNG GEBRAUCHTER GERÄTE
Dieses Produkt darf nicht über den normalen Hausmüll
entsorgt werden. Geben Sie das Gerät bei entsprechenden
Sammel-
und
Recyclinghöfen
für
Elektro-
Elektronikgeräte ab. Überprüfen Sie das Symbol auf dem
Produkt, der Bedienungsanleitung und der Verpackung.
Die bei der Konstruktion des Gerätes verwendeten
Kunststoffe können entsprechend ihrer Kennzeichnung
recycelt werden. Mit der Entscheidung für das Recycling
leisten Sie einen wesentlichen Beitrag zum Schutz unserer
Umwelt. Wenden Sie sich an die örtlichen Behörden,
um Informationen über Ihre lokale Recyclinganlagen zu
erhalten.
und

TECHNICAL DATA

Parameter description
Parameter value
Product name
TOWEL WARMER
PHY-
PHY-
PHY-
400TH-1
230TH-1
200TH-1
Model
PHY-
PHY-
PHY-
400TH-1
230TH-1
200TH-1
_BLACK
_BLACK
_BLACK
Rated voltage [V~]/
230 / 50
Frequency [Hz]
Rated power [W]
450
230
UV lamp power [W]
6
Protection class
I
Protection rating IP
IPX0
450x340
450x290
450x380
Dimensions [mm]
x510
x350
x290
Weight [kg]
8,1
5,5
5,6
Capacity [L]
32
23
16
Temperature range
<70
[°C]
(+/- 10°C)
Emitted noise level
<70
[dBA]
Wavelength [nm]
200-280
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
ATTENTION! Electric shock warning!
ATTENTION! Hot surface, risk of burns!
Only use indoors.
Do not expose eyes and skin to the device
operation (UVC radiation).
UV
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
The terms „device" or „product" are used in the warnings
and instructions to refer to TOWEL WARMER. Do not use in
very humid environments or in the direct vicinity of water
tanks. Prevent the device from getting wet. Risk of electric
shock! Do not exceed the maximum permissible operating
pressure! Do not cover the ventilation openings!

2.1. ELECTRICAL SAFETY

a)
The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment.
Water getting into the device increases the risk of
damage to the device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e)
Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
f)
To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
g)
ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.

2.2. SAFETY IN THE WORKPLACE

a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust. The device
generates sparks which may ignite dust or fumes.
c)
If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Phy-230th-1Phy-200th-1Phy-400th-1 blackPhy-230th-1 blackPhy-200th-1 black

Tabla de contenido