Timer Recording; Automatic Timer Recording - TRT DTK 5400HF Manual De Instrucciones

You may set the VCR to start and end a recording while
you are away. You can set seven programs to record on
specific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE:
SETTING TIME:
CHANNEL:
TAPE SPEED:
PROGRAM NO:
Be sure to check that the "PWR." and the "VCR"
indicators are both on to program it.
Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4 switch on
the back of the VCR to match the channel
selected on the TV.
Clock must be set to the correct time and date before
setting the timer.
Insert a cassette tape with its erase prevention tab in
place. (If necessary, rewind or fast forward the tape
to the point at which you want to begin recording.)
Avoid overlap of programs ...
There is a case that a program will not be performed.
When programs overlap:
The program with an earlier start time has priority.
Once the earlier program finishes, the overlapping
programs will begin recording in sequence.
The illustration below demonstrates the sequence of
recordings.
Program 1
(10:00AM-11:00AM)
Program 2
(9:00AM-10:00AM)
Program 3
(9:30AM-12:00PM)
9:00AM
*Recording period is SHADED
All manuals and user guides at all-guides.com

TIMER RECORDING

AUTOMATIC TIMER RECORDING

May 3rd, 2001
from 7:30PM to 8:30PM
CH16
SP
No. 1
CH3
[Back of
the VCR]
Recording Sequence
10:00AM 11:00AM 12:00PM
1
Select "TIMER PRO-
GRAMMING"
First, press the MENU button.
Next, press the PLAY/
STOP/ button to point to
"TIMER PROGRAMMING". Then, press the
F.FWD/B button.
NOTE:
If you have not yet set the clock, "CLOCK SET" ap-
pears. If so, follow the steps [3] and [4] on page 20.
Then, set the timer recording.
2
Select your desired program number (1~7)
CH4
Program number which is not set up flashes.
Press the PLAY/
button until your desired pro-
gram number appears. (Exam-
ple: 1)
Then, press the F.FWD/B but-
ton.
3
Select once, daily or weekly recording
For once recording :
Confirm "ONCE" is pointed
to, then press the F.FWD/B
button.
For daily recording : To record a TV program at the
same time on the same channel from Monday through
Friday.
Press the PLAY/
STOP/ button to point to
"DAILY", and then press the
F.FWD/B button.
For weekly recording : To record a TV program at the
same time on the same channel every week.
(Example: every Monday on ch 7 at 5:00PM)
Press the PLAY/
STOP/ button to point to
"WEEKLY", and then press
the F.FWD/B button.
- 29 -
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
or
or STOP/
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
PROGRAM NUMBER 1
or
ONCE
B DAILY
WEEKLY
or
PROGRAM NUMBER 1
ONCE
DAILY
B WEEKLY
[OFF]
[ON]
EN
1B14