koban KMP-04-S Manual De Instrucciones página 3

II, Adjustment procedure:
Schematic diagram of indication Schematic diagram of wiring
Figure 1 Figure 2
III, Connections:
- PIN 1 and 2 serve to electrically feed the internal motor of the product for operation.
- PINs 2 and 3 are joined and continue the current.
- The PIN3 is a current output to always feed a circuit.
- PIN 4 and 5 serve to generate a circuit in which the load is NO or NC (normally open or
closed). If it is connected to PIN 5, the load will be NC and if it is connected to PIN 4 it will
be NO.
- The output of the load will be connected to the neutral of the network and will close the
circuit.
FR
I, réglage de l'heure actuelle:
Tournez le cadran dans le sens des aiguilles d'une montre pour que la flèche indique
l'heure actuelle. S'il est 11 heures, laissez la flèche pointer à 11 heures.