Horizon Global 76471 Instrucciones De Instalación página 4

1. Remove taillight covers- Open tailgate. Using flathead screwdriver, remove push rivet(1) from trim piece near driver taillight. Using plastic trim tools, gently pull
trim piece off and set aside for later use, see Figure 4. Repeat steps on passenger side.
2. Remove rear bumper fascia - a.) Using a T15 star driver, remove 4 screws from bottom center fascia. Set fasteners aside to be reinstalled.
©2021 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 24 76471NP 5-6-21 Rev. A