Uline 2510 Manual De Instrucciones página 2

Longer
Side
Longer
PAGE 2 OF 6
ASSEMBLY CONTINUED
Longer
Side
Shorter
Side
Shorter
Side
Side
Shorter
Side
2. Install Back Braces:
Figure 2
For 12" and 18" deep units, attach back braces to
the shorter side of the posts. From the bottom up,
locate the 12th hole. From the top down, locate the
10th hole. Insert bolts through back braces and
posts. Tighten bolts with nuts. (See Figure 2)
3. Install Bottom Shelf:
Figure 3
For 12" and 18" deep units, align shelf with third hole
up from bottom. Insert bolt through the shorter side
of the post and through the shelf. Tighten bolts with
nuts. (See Figure 3)
NOTE: Shelf bolts should be facing the front
and back of the unit.
4. Install Top Shelf:
Figure 4
For 12" and 18" deep units, align shelf with top hole.
Insert bolts through the shorter side of the post and
through the shelf. Tighten bolts with nuts. (See Figure 4)
5. Install Remaining Shelves:
Figure 5
For 12" and 18" deep units, stand the unit up. Insert
remaining shelves every sixth hole to evenly distribute.
Tighten all bolts using wrench. (See Figure 5)
1-800-295-5510
uline.com
0621 IH-2510