Publicidad
Idiomas disponibles
Idiomas disponibles
STEP
Align the screw holes on 360°Rotating Unit (P) with the
Lower Bracket (A) and Upper Bracket (B), then attach using
M0.24x0.39" Bolt (AA), M0.39x0.98" Bolt (CC) and Washers
3
(EE) with S5 Wrench (GG).
Then align the screw holes on Base Tube (C) with the Lower
Bracket (A) and Upper Bracket (B), then attach using
M0.39x0.79" Bolt (DD) and Washers (EE).
Slide the Corner Connectors (K) into the four ends of the
assembled Brackets (A) and (B).
4
Slide the Side Panels (I) downward between the Corner
Connectors (K).
PAGE 7 OF 17
Publicidad
