to change the direction when you move forward (as shown in the diagram).
5.5. Charge
Plug the adapter into the rectangular socket on the unicycle (as
shown in the picture). This socket can be found by sliding the
socket cover in the direction the arrow shows. Push in when it is
switched to the very end. A red indicator light and sound effect
notifies you that the charging plug is in the correct position.
When the light turns from red to blue, it means the battery is
fully charged.
5.6. Reset
If the system encounters an error, please use the reset button to shut down the unicycle. Switch the reset button to the right as shown
below.
43