Operation And Use Of Tiller - Goodyear GY 1000TL Manual De Instrucciones

English
Owner´s manual
•
This maximum inclination angle shown simply
serves as a reference and should be determined
according to the type of tool to be used. Before
starting the engine, check that the motor is
not damaged and that it is in perfect working
condition. For your safety and that of others,
exercise caution when using the motorhome
uphill or downhill.

2. OPERATION AND USE OF TILLER

Scope
The motoazada is suitable for tilling in sandy soils
and in clay soils covered with vegetation and on
dry lands, and on slopes with an inclination less
than 10%, in rice fields with a depth of water that
reaches the hard top layer, and not more than
250mm.
To cultivate plots with weeds, and to eliminate
weeds before tilling the land to be cultivated with
the mini motoazada.
Checks to be made before using.
1) Engine oil.
CAUTION: Running the engine with a low oil
level can seriously damage the engine.
Remove the oil cap and clean the oil dipstick with a cloth.
Insert the rod into the neck but do not screw it.
If the level is low, fill it with the recommended oil to the top
mark of the filler neck.
Use 10W-40 or 15W-40 Multigrade certified oil
for 4-stroke engine or Diesel (Depending on the
machine purchased) of premium quality, which
meet or exceed the requirements established by
the US automakers of API service classification
SG, SF.
CAUTION:
The use of 2-stroke engine oil can shorten the life
of your engine.
It is recommended to use SAE 10W-40 oil for
Gasoline or Diesel (depending on the machine
purchased), for all operating temperatures. You
can use oils of other viscosity shown in the table
when the average temperature of your area is
within the ranges indicated.
5W-30
Room temperature
Rod cap
Rod cap
Minimum level
2) Transmission oil
WARNING:
Place the motor hover horizontally and remove
the oil filler cap. The oil should be level with the
edge of the bottom of the fill hole. Add the same
engine oil if the level is low.
30
10W-30
Orifice
oil filling
Maximum level
Orifice
oil filling
33