ACME CarCamOne Manual página 8

Download the data
Choose „ " and connect the CarCamOne with the supplied USB-cable and your PC.
The CarCamOne will be displayed as a single drive. Attend that network drives can interfere the CarCamOne drive.
Cut the network drives. Of course you can connect the SD-card directly to your pc card reader.
Charge the CarCamOne
The charging starts on its own by connecting the CarCamOne with the PC.
It will take approximately 3 hours to charge the CarCamOne.
The battery status is indicated in percent below modes as follows: , , .
Recharge the cam when " " is displayed.
The modes
Video recording [ ]
The recording takes place with 28 pictures per second (28 FPS) with 640x480 px and a consumption of storage of approx. 50 MB/min.
Recording is indicated by running dots" ". FPS rate can be reduced by a dark or indoor environment.
Video endless [ ]
Recording as above – however the free storage (min. 200 MB) of the SD-card is shared and the old part will be overwritten consecutively.
The recording will be stopped not until the shutter button [2] gets pressed.
Photo [ ]
The recording takes place with 640x480 px, one photo needs approx. 100 KB storage on the SD-card.
The CarCamOne indicates the recording with a frame„ ".