Publicidad
MAST TO BOOM PLATE ASSEMBLY
ENGLISH
The BOOM to MAST plate (EA013018) of 100X100X6mm consists of 8 holes; 4 thick for round U-bolts and other 4 for the square U-bolts
to holding the BOOM.
The 4 holes are thicker function that make the greatest force on the mast, and retain the original angle BOOM to maintain proper spacing
between boxes.
The Round U-bolts M8 (A-0163), are fixed by DIN 9021 M8 washer and DIN 934 M8 nut provided in the same U-bolt, and fixed to the mast
with clamp (23035.50).
Detailed drawings for further illustration:
(EA013018)
(EA013018)
(EA013018)
Front view from Mast
Front view from BOOM
(A-0163)
(23035.50)
(P0500030)
(S934-96)
(S9021-96)
Side view from Mast
Side view from BOOM
Publicidad
