Uline JUMBO H-1229 Instrucciones De Montaje página 2

Step 1:
• Snap left side panel (B) into floor panel (A).
(See Figure 1)
Figure 1
• Position back panel (D) but DO NOT SNAP INTO BASE.
• Interlock back panel (D) into left side panel (B).
• Snap right side panel (C) into floor panel (A).
(See Figure 2)
• Interlock back panel (D) into left side panel (C).
Figure 2
PAGE 2 OF 15
ASSEMBLY
• With back panel interlock with grooves on side
panels, slide down and snap into floor panel.
(See Figure 3)
Figure 3
Step 2:
• Insert header (F) into underside of roof panel (E).
(See Figure 4)
Figure 4
• Use 4 screws to secure header to roof panel.
DO NOT OVERTIGHTEN SCREWS. (See Figure 5)
Figure 5
F
E
0421 IH-1229