Beper BB.103 Manual Del Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
EN
Electric Kettle Use Instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Use advice
1. The kettle must be used only on its provided base.
2. Use the kettle only to boil water.
3. Do not turn on the kettle without closing the lid.
4. Switch off the kettle before removing it from the base.
5. Never immerse any parts of the kettle into water or other liquids.
6. Do not fill the kettle under the MIN level or above the MAX level.
7. Before the first use, make sure to rinse properly the kettle.
Description Fig.A
1. Lid
2. Pouring spout
3. Tea filter
4. Handle
5. Water level indicator
6. Kettle body
7. On/off switch
8. Power indicator
9. Base
How to use it ?
1. Place the kettle on a stable surface.
2. Remove the kettle body from the base and fill it with water, respecting min and max levels indicated on the
water level indicator. Water can be filled by opening the lid or through the pouring spout. Close the lid and put the
kettle body on the base. Plug the appliance to the electric socket.
3. Press on/off switch downwards and the kettle starts to operate. The power indicator lights up. When both the
switch and the light turn off, water is ready to be used. Press on/off switch downwards to interrupt the cooking
anytime in case of necessity.
4. Lift the kettle body only by the handle.
The kettle body becomes very hot and must not be touched directly with hands.
5. Disconnect the cord supply form the electric socket.
To prepare tea with tea leaves
1. Remove the lid from the kettle body.
2. Add the desired quantity of tea leaves into the tea filter.
3. Insert the open edge of the filter to the lower part of the lid until it fits in place.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido