Charging The Battery; Optimizing Battery Life - Genesis GP-501S2 Guia De Inicio Rapido

Note:
The SD card is a miniature object. Keep it out of the reach of children for fear that children swallow it!

3.2 Charging the Battery

* Your mobile phone can monitor and display the battery state.
* Normally the remaining energy of the battery is indicated by the battery level icon at the upper right corner of the display
screen.
* When the battery energy is insufficient, the mobile phone prompts "Battery low".
Using a travel adapter:
* Install the battery into the mobile phone before charging the battery.
* Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the adapter is fully inserted.
* Insert the plug of the travel charger to an appropriate power outlet.
* During the charging, the battery level grids in the battery icon keep flickering till the battery is fully charged.
* The battery icon does no longer flicker when the charging process ends.
Note:
Ensure that the plug of the charger, the plug of the earphone, and the plug of the USB cable are inserted in the right direction. Inserting
them in a wrong direction may cause charging failure or other problems.
Before the charging, ensure that the standard voltage and frequency of the local mains supply match the rated voltage and power of
the travel charger.

Optimizing battery life

You can extend your battery's life between charges by turning off features that you don't need. You can also monitor how
applications and system resources consume battery power.
To guarantee the optimal performance of your battery, please stick to the following rules:
* Turn off radios that you aren't using. If you aren't using Wi-Fi, Bluetooth, or GPRS, use the Setting application to turn them off.
* Turn down screen brightness and set a shorter screen timeout.
Page 14