Reversing The Door Swing - AMERICANA A3309AASWW Manual De Instrucciones

1

REVERSING THE DOOR SWING

IMPORTANT NOTES
When reversing the door swing:
• Read the instructions all the way through before
starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid using
them in the wrong places.
• Provide a non-scratching work surface for
the doors.
IMPORTANT: Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing the hinges from
the right side to the left side—if you ever want to change
the hinges back to the right side, follow these same
instructions and reverse all references to left and right.
TOOLS REQUIRED
Phillips screwdriver
5/16" hex-head
socket driver
Putty knife or thin-blade
screwdriver
BEFORE YOU START
1
1.1 Unplug the refrigerator from its electrical
outlet.
10
Installation Instructions
Masking tape
T20 or T25 Torxdriver,
(needed for some
models)
5/16" open-end
wrench
1.2 Empty all door shelves, including the dairy
compartment.
CAUTION: Do not let either door drop to the
floor. To do so could damage the door stop.
REMOVE THE FREEZER DOOR
2
2.1 Tape the door shut with masking tape.
2.2 Remove the hinge cap from the top hinge with
a putty knife or a thin-blade screwdriver. With a
5/16" hex-head socket driver, remove the screws
that hold the top hinge to the cabinet.
Hinge Cap