Hitachi RAK-18NH6AS Manual De Instrucciones página 14

HOW TO SET THE SLEEP TIMER
Set the current time at fi rst if it is not set before (see the pages for setting the current time). Press the
(SLEEP) button, and the display changes as shown below.
SLEEP
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the
The (RESERVED) sign goes out with a beep and the
All manuals and user guides at all-guides.com
Mode
4
Sleep timer
Sleep Timer: The device will continue working for the designated number of
hours and then turn off.
Point the signal window of the remote controller toward the indoor unit, and
press the SLEEP button.
The timer information will be displayed on the remote controller. The TIMER
lamp lights with a beep from the indoor unit. When the sleep timer has been set,
the display indicates the turn-off time.
AM
H
Sleep
Start
timer
1
Set the ON-timer.
2
Press the (SLEEP) button and set the sleep timer.
AM
H
AM
(TIMER) lamp turns off on the indoor unit.
– 12 –
Indication
4 4
1 hour 2 hours 3 hours
Sleep timer off
Example: If you set 3 hours sleep time
at 11:38 p.m., the turn-off time is 2:38
a.m.
The device will be turned off by the sleep timer and
turned on by on-timer.
For heating:
In this case, the device will turn off in 2
hours (at 1:38 a.m.) and it will be turned on
6:00 next morning.
(CANCEL) button.
4
7 hours
1