Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING BASICS
Changing the Channel Melody
You can set a different melody sound for each Sensor/Doorbell Channel.
1.
Press the Melody Select button on the side of the Indoor Alarm Receiver. The next
melody is played. Keep pressing the Melody Select button until you hear a melody
you like. There are 36 melodies to choose from.
2.
Choose the Sensor/Doorbell Channel (must have at least one paired device) you want
the melody to be assigned to by pressing and holding the desired Sensor/Doorbell
Channel button until the corresponding Sensor/Doorbell Channel LED lights up.
3.
Within 25 seconds, trigger any device linked to the Sensor/Doorbell Channel:
— trigger Alert Sensor by waving your hand in front of it, or
— trigger Doorbell by pressing the Doorbell button
4.
The Indoor Alarm Receiver plays the chosen melody with the corresponding Sensor/
Doorbell Channel LED blinking as confirmation.
Muting the Indoor Alarm Receiver
Like some peace and quiet for a period of time? You can easily turn off the alert sounds
coming from any channel on the Indoor Alarm Receiver.
To mute a channel:
•
Briefly press the Sensor/Doorbell Channel button that corresponds with the
channel that you want muted. The Indoor Alarm Receiver beeps twice to confirm
the selected channel has been muted.
•
Any alerts triggered by devices on that particular channel will not be sounded,
however, you will still be visually alerted by the corresponding Sensor/Doorbell
Channel LED blinking for 25 seconds when the device is triggered.
To unmute a channel:
•
Briefly press the Sensor/Doorbell Channel button that corresponds with the
channel that is currently muted. The Indoor Alarm Receiver beeps once to confirm
the selected channel has been unmuted.
Resetting the Indoor Alarm Receiver
Resetting the Indoor Alarm Receiver removes all devices that have been paired with
it. This will enable you to add those devices to different channels. Resetting can also
help fix some common issues (for example, the Indoor Alarm Receiver sounding
unexpectedly because of signal interference from neighboring devices).
To reset the Indoor Alarm Receiver:
•
Press and hold the Melody Select button on the side of the Indoor Alarm Receiver
until all of the Doorbell and Sensor Channel LEDs light up at the same time.
•
After resetting the Indoor Alarm Receiver, you will need to pair the Alert Sensor and
the Doorbell with it again.
EN
7
Publicidad
Tabla de contenido
