Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11

ENGLISH

4
DEVICE LAYOUT:
1. Main Button
2. Indicator light
3. Micro-USB Input
4. UV-C LED
5. Vacuum Bottle
SPECIFICATIONS:
• Battery Capacity: 400mAh
• Bottle Capacity: 500ml / 17oz
• UV-C Wavelength: 270 - 280nm
• Fully Charging Time: Around 3hrs
• Purification Time:
- Regular Mode: 3 mins
- Ultra Mode : 5 mins
• Purify Effective: 99.9%
HOW TO USE
1. Screw the lid on tightly
2. Choose the sanitization mode Regular 3 minutes. Ultra 5 Minutes
3. Regular mode: Click the button on the top, the indicator light will
illuminate blue, the UV-C led inside the lid will run for 3mins. Click the button
to cancel purifying cycle while in process.
4. Ultra mode: Double click the button on the top, the indicator light will
illuminate green, the UV-C led inside the lid will run for 5mins.
5. Click the button to cancel purifying cycle while in process.
FAST SANITIZING
Solid Blue - In the progress of Sanitize.
Flashing Blue (3 seconds) - Sanitize Finished.
Turn Off - Sanitize Turn off
DEEP SANITIZING
Solid Green - In the progress of Sanitize.
Flashing Green (3 seconds) - Sanitize Finished.
Turn Off - Sanitize Turn off
CHARGING THE UV-C LID:
The UV-C lid must be fully charged before first time usage, using the cable
with provided plug. Indicator light will illuminate red when charging and
automatically turns off once fully charged.
Note: Once the battery is low, the indicator light will illuminate blue or green
light while working. It does not remove physical impurities from water, just
used for eradicating harmful bacteria.
SAFETY SENSOR & PROTECTION
Built-in magnet sensor to protect user from UVC light. The product CANNOT
be powered on when the cover is not closed. When you open the bottle
in the progress of sanitizing, sanitizing will be stopped immediately. You
need to close the lid then manually press the button to restart the sanitizing
from beginning.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido