Wheel Removal; Wheel Installation - Yamaha GRIZZLY 125 Manual Del Propietário

1. Tapered wheel nut
1. Roue et les écrous
1. Rueda y las tuercas
EBU01112

Wheel removal

1. Loosen the wheel nuts.
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
EBU01150

Wheel installation

1. Install the wheel and the nuts.
NOTE:
Tapered wheel nuts are used for both front and
rear wheels. Install the nut with its tapered side
towards the wheel.
2. Lower the ATV to the ground.
3. Tighten the wheel nuts to the specified
q
torque.
Tightening torque:
Front wheel nut:
55 Nm (5.5 m0kgf)
Rear wheel nut:
55 Nm (5.5 m0kgf)
8-75