Connecting The Receiver - Leotec LERK03 Manual Del Usuario

All manuals and user guides at all-guides.com
Touchpad
The touchpad can be used in a horizontal or
vertical position. To switch between horizontal or
vertical mode, hold the Fn key and hit the Alt key.

Connecting the receiver

Slide the receiver out from the side of keyboard,
and insert to the devices with a standard USB
interface. Once connected, slide the power switch
to the "ON" position located on the left side of the
unit to establish the connection.
Auto sleep and wake feature
The keyboard also features an auto sleep and auto
wake mode. If there is a long period of inactivity, the
keyboard will automatically go into a sleep mode.
During the sleep mode, the user can wake the unit
up by pressing any key. The 2.4 GHz receiver and
keyboard's RF indicator will continue to flash and
will not power down.
Switching off the keyboard after use
After finishing using the keyboard,push the switch
to the off position.This turns off the power,of the
keyboard.The USB receiver should be plugged out
from the PC and then inserted back in the keyboard
so it is being kept safely.