Receiving Traffic Information - Alpine TDA-7567R Manual De Operación

1
2
54
All manuals and user guides at all-guides.com
T.INFO TP
T. INFO
DN
UP
T.INFO TP
RDS Operation RDS Operation
Receiving Traffic
Information
Press the T.INFO button to activate the Traffic
Information mode.
Press the DN or UP button to select your
desired traffic information station. When a traffic
information station is tuned in, the TP indicator
lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being
broadcast, the unit is set in the standby mode.
When a traffic information broadcast begins, the
unit automatically receives it and the display
shows "T-INFO."
When traffic information broadcast is over, the unit
will automatically set in the standby mode.
Notes: • If the traffic information broadcast
signal falls below a certain level, the
unit remains in the receiving mode for
1 minute. If the signal remains below
a certain level for over 1 minute, the
unit produces an alarming sound.
• If you do not want to listen to the traffic
information being received, lightly
press the T. INFO button to skip that
traffic information message. The T.
INFO mode will remain in the ON
position to receive the next traffic
information message.
English English