TEFAL Easy Soup BL841138 Manual Del Usuario página 73

PROBLEMS
Excessive vibrations
Leak at the top of the jug.
Poorly-mixed preparations.
The appliance has cut the
electricity supply.
Your appliance continually
beeps and all the LEDs are
flashing.
The food is not properly
cooked or something is
caught at the base of the
jug.
CAUSES
The appliance has not been
placed on a flat surface; the
appliance is not stable.
Volume of ingredients is too
high.
Overflow sensor
clogged up.
Volume of ingredients is too
high.
Pieces of food are too large
or too hard.
Stop the motor using the
motor overload protector.
Appliance is damp.
Fouled up overflow sensor
Your appliance is equipped
with a level sensor (C).
Volume of ingredients is too
great.
You have not selected the
right programme.
Not enough or too much
liquid.
Ingredients not
properly.
You have used the appliance
to heat up milk.
SOLUTIONS
Place your appliance on a
stable,flat
clean, and dry surface.
Reduce the quantity of
ingredients processed.
(C) is
Clean sensor (C).
Reduce the quantity of
ingredients processed.
Reduce the size or quantity
of ingredients processed.
Leave your
cool down for at least 20
minutes and reduce the size
or quantity of ingredients
processed.
Add liquid.
Leave the appliance to dry
for 24 hrs before trying to
connect again.
(C) Clean the sensor
Reduce the quantity of
ingredients.
Do not
maximum level
ingredients.
Start again, choosing the
right programme.
Check that the liquid is
between the MIN and MAX
levels for settings P1 and P2
(fig 3).
For P3, ensure there is
between 150ml and 300ml
of liquid.
Stir the
blended
ingredients
manually
The soup-maker
appropriately-designed
do this.
heat-resistant,
product to
(C)
exceed the
(fig 3) of
liquid and
together
(fig 4).
is not
to
EN
69
69