3). Set up SMTP Function on PC
Click on SMTP, the following interface is displayed:
1. Auto MMS MODE
Select Country and Operator.
Select sending email provider, address and password.
Please pay attention to your costs per MMS!
Then add another email address for receiving the pictures.
2. Manual MMS MODE
Contact your mobile phone network operator for all the required information: APN, MMSC, IP
and Port and enter.
Please pay attention to your costs per MMS!
Then add sending email address and password.
For receiving pictures, please add another email address.
Click on Save to save your settings in the root directory of the SD card (you need to insert the SD
card in your computer). A file named Parameter.dat will be created and saved in the directory
you just selected.
Remove the SD card from the computer and insert it in the camera. Switch to TEST position to
check the settings.
Note: Because every network provider has its own settings for their MMS service, we
recommend verifying all settings with your network provider, even if you select Auto to let the
system to configure the settings. We pre-configure these settings for every major network
provider on the CD. If you find that the settings have been changed, please notify us so that we
can update the program.
Please pay attention that "MMS Function" must be in "OFF" mode.
17