SCM Microsystems CHIPDRIVE MICRO PRO Manual página 12

All manuals and user guides at all-guides.com
3 Installing the Hardware
Warning: If your card reader has a serial connector (COM port),
turn off your PC before connecting the device. Failure to do so may
result in damages to your PC or the card reader.
3.1 CHIPDRIVE ®
smartFold (SCR3500)
Connect the smart card reader to a USB port on your computer
3.2 CHIPDRIVE ®
The CHIPDRIVE
connector that allows you to connect the card reader to the serial or
USB port on your PC. Connect the serial or USB adaptor to the device
before connecting it to your PC. Never change the adaptor cable when
the unit is connected to your PC.
The CHIPDRIVE
power from the PS/2 port. In order for the device to function correctly,
both connectors (COM and PS/2) must be connected to your PC.
micro pro (SCR335) / desktop pro (SCR3311) /
pinpad pro (SPR532)
® pinpad pro offers an optional available hybrid
® pinpad pro (with serial connector) requires additional