Connecting To An Antenna - Samsung 6030 Serie Manual Del Usuario

When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
The position of power input port may differ depending on the model.
Cable
ANT OUT
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Setup is available only when the Source is set to TV.
✎
To start the Setup, enter the password using the remote control. The default password is 0-0-0-0.
✎
To return to the previous step, press the Previous button.
1. Menu Language: Selecting a menu language
Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.
2. Use Mode: Selecting the usage mode
Press the ▲ or ▼ button, then press the ENTERE button.
y Select the Home Use mode. Store Demo Mode is for retail environments.
y When pressing TV controller, the function menu screen appears. Select the Menu(m) and press it more than 5 seconds
using the controller. The Store Demo mode is set. Cancel the Store Demo by selecting Source (s) and pressing it
more than 5 seconds.
y Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use
when you watch at home.
3. Network Settings: Configure network settings
1. Connect LAN Cable or Samsung Wireless LAN Adaptor, select the Next, then press the ENTERE button.
✎
If you select the Skip, you have to set network in the Network Settings respectively. For more information, refer
to "Setting the Wired Network / Setting the Wireless Network" in the e-Manual.
2. Complete the network settings in accordance with your desired way.
[UE6030-ZL]BN68-04469D.indb 6

Connecting to an Antenna

Antenna Cable (Not Supplied)
Setup (Initial Setup)
English - 6
* It may differ depending on the model.
TV Rear
Power Input
2012-05-21 11:54:35