HAMPTON BAY CM2404A Instrucciones De Instalación

INSTALLATION INSTRUCTIONS FOR
PULL OUT TRAY 24"
1. Identify assembly components to be used. (Spacers (2), Screws (8)).
2. In the interior side cabinets, draw a straight line from the front to the back of the cabinet
2" above the bottom of the cabinet.
3. For the right side rail installation, place a mark from front of cabinet 1 ½", and a second
⅜"
mark at 13
deep.
4. For the left side rail installation, place 4 marks all from front of cabinet:
a. First mark at 7/8"
b. Second mark at 2
c. Third mark at 12
d. Fourth mark at 14"
5. Using a 3/16" bit, drill the holes on the marks and drill ½" deep.
6. Place the spacers on the right side and attach them by using 2 screws per spacer, place the
rail on top of them and attach the rail to the spacer.
7. Insert the drawer box into the rails.
from front of cabinet and using a 3/16" bit, drill the holes on the marks ½"
⅛
"
¾ "