MONCOLHA7PN2 – 7" TFT LCD 16/9 Monitor with Remote Control
1. Introduction
At the end of its life cycle, dispose of this product in accordance with local and national disposal regulations.
Thank you for buying the MONCOLHA7PN2. We advise you to read this manual before you bring the device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.
This is a light CRT monitor with low radiation and no distortion. Power consumption is minimal and the construction
materials are nature-friendly. This 7" TFT LCD monitor uses a DSP chip and offers a clear picture and true colours.
2. Features
• IR remote control
• OSD display
• setting mode with automating store function
• automatic recognition of NTSC/PAL signal guarantees a clear picture
3. Specifications
Screen Size
Display Format
Effective Display Dimensions
System
Video Input
Audio Input
Power Supply
Current
Power Consumption
Operating Temperature
Storage Temperature
4. Front Panel Description
1. IR Window
Sensor for remote control IR signals.
2. Power LED
Is lit when the device is activated.
3. MODE
Sets an aspect ratio of 16:9 or 4:3.
4. SYS
Image is: 1-rotated 180° ; 2-mirrored ; 3-
flipped (=180°+mirrored) ; 4-normal.
5. AV button
Select source: video 1 or 2.
6. "-" button
To lower the volume (standard) or the
value for the selected parameter (#7).
7. SEL button
Select a parameter (order: brightness /
colour / contrast / tint). Adjust with + & -.
8. "+" button
To increase the volume (standard) or the
value for the selected parameter (#7).
9. Power switch Press this button to activate/deactivate the monitor. The indicator (#2) lights up to indicate that
the device is active.
10. TFT LCD
11. Connector
Input jack.
MONCOLHA7PN2
All manuals and user guides at all-guides.com
7" (diagonal)
1440 (RGB) (H) x 234 (V) = 336960 pixels
154.1 x 85.5mm
NTSC/PAL (automatic recognition)
1.0Vp-p (75Ω)
-10dB (10kΩ)
DC11V-14V (e.g. PS1205R)
≤ 800mA
≤ 10W
5 to 40°C
-10 to +80°C
- 1 -
Fig.1
VELLEMAN