Using Your Cold Press Juicer - Westbend JC2009SV13 Manual De Instrucciones

Reference
1
Power Line
2 Juicer Body
3
Power Switch
4
Button
5 Juice Cup
6 Pulp Cup
7 Pusher
8 Hopper
9 Drum & chute
10 Auger
11 Fine Strainer
12 Joint
13 Cover
Please check all packaging material carefully before discarding.
Many accessory parts are contained within the packaging material.
Wash the juicer components thoroughly before using.
Refer to the maintenance section in this manual.
1
2
English - 4
Part
U Y C
SING OUR
Connect the juicing body to the machine body:
1. Align the central position of the drum/chute with
the juicer body.
2. Then rotate counterclockwise, and when you hear
a "click" sound, the drum/chute is fully connected.
Align the auger with the hole in the machine body
and push it gently to attach.
Used to power on and provide power.
The main parts of the machine,
including the motor and other parts.
Controls the machine's operation.
Used to lock the juicing body and
prevent loosening from the machine
during operation. To remove the juicing
body from the machine body, press and
hold the button.
Catch and collect juice.
Catch and collect pulp.
Gently pushes the ingredients so
that they are in full contact with the
auger for juicing efficiency.
Area where juice ingredients are
placed.
Main parts of the juicer
components.
Grinds and squeezes the
ingredients together through the
strainer to make juice.
Filters the juice.
Joint between the juicing body and
the cover.
Connects juicing components.
P J
OLD RESS UICER
Function