Publicidad
Deploying in the Field
6. Deploy (turn ON) your device
The function indicator lights will flash blue and then turn green, one at a time starting with
the battery light, in a clockwise direction. This may take a few minutes.
The Mark 2 is successfully deployed when all four lights are green.
Note: If the lights blink blue and turn off in a counterclockwise direction, the device has just
undeployed. Repeat Step 6.
ALL GREEN LIGHTS
Successfully deployed
7. Verify deployment
Short-press the button (< 2 seconds) and check the status indicator light on the underside
of the device. A green light indicates successful deployment. If the light is red, refer to
Troubleshooting on page 9.
5
Press and hold the button for 5 seconds
to deploy.
5
SEC
Connecting
ANY RED LIGHTS?
Refer to Troubleshooting
on page 9
Connecting
Successful
Failure
Undeployed
Publicidad
