Becken BAC4255 Manual Del Usuario página 30

+
Up (+) and Down (-) buttons
-
Used to adjust (increasing/decreasing) temperature settings
in 1° C / 1° F (or 2° F) increments in a range of 17° C / 62° F
to 30° C / 86° F (or 88° F) or the TIMER setting in a range
of 0~2 4hrs.
Note: the control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius. To convert from one
to the other, press and hold the Up and Down buttons at the
same time for 3 seconds.
FAN Fan/Ion button (Ion is optional)
ION Control the fan speed. Press to select the fan speed in four
steps-LOW, MED, HIGH and AUTO. The fan speed indicator
light illuminates under different fan settings. When select
AUTO fan speed, all the fan indicator lights turn dark.
On some models, when select AUTO fan speed, all the fan
indicator lights illuminate (optional).
Note: press this button for 3 seconds to start the ION feature.
The ion generator is energized and will help to remove pollen
and impurities from the air, and trap them in the filter. Press it
for 3 seconds again to stop the ION feature.
SLEEP Sleep (Eco) button
Used to initiate the SLEEP/ECO feature.
On/Off Power button
LED display
Shows the set temperature in °C or °F (some models
do not display temperature in "°F") and the Auto-timer
settings. While on DRY and FAN modes, it shows the room
temperature.
Shows Error codes and protection code:
E1 – Room temperature sensor error.
E2 – Evaporator temperature sensor error.
30
AF_Manual_AC_12000BTU_BAC4255_BAC4255N.indd 30 21/01/2019 10:25