FOREVER Animal AMS-100 Manual página 4

EN EN
EN EN
Thank you for purchasing a product by Forever. Before use, please refer to the Thank you for purchasing a product by Forever. Before use, please refer to the
User's manual, and save it for future reference. Do not disassemble the device User's manual, and save it for future reference. Do not disassemble the device
on your own – all repairs should be done by a service technician. Use only ori- on your own – all repairs should be done by a service technician. Use only ori-
ginal parts and accessories provided by the manufacturer. The device should ginal parts and accessories provided by the manufacturer. The device should
not be exposed directly to water, moisture, sunlight, fi re or other heat sources. not be exposed directly to water, moisture, sunlight, fi re or other heat sources.
We hope that the product by Forever fulfi lls your expectations. We hope that the product by Forever fulfi lls your expectations.
Image description Image description Image description
1. Microphone 1. Microphone
2. Echo loudness adjustment 2. Echo loudness adjustment
3. Turn on/off the device 3. Turn on/off the device
4. Increase volume / Previous track 4. Increase volume / Previous track
5. Reduce volume / Next track 5. Reduce volume / Next track
6. Switch between the microphone and playback from SD card 6. Switch between the microphone and playback from SD card
7. Voice modulator 7. Voice modulator
8. Microphone slider 8. Microphone slider
9. MicroSD cards slot 9. MicroSD cards slot
10. USB port 10. USB port
11. 5 V DC charging connector 11. 5 V DC charging connector
Specifi cation: Specifi cation: Specifi cation:
Capacitive microphone Capacitive microphone
Loudspeaker power: 5W Loudspeaker power: 5W
Bandwidth: 100HZ-10KHZ. Bandwidth: 100HZ-10KHZ.
Maximum gain: >115dB 1Khz THD <1%. Maximum gain: >115dB 1Khz THD <1%.
Built-in battery: Li-lon 2000mAh. Built-in battery: Li-lon 2000mAh.
Bluetooth: 5.0 Bluetooth: 5.0
Echo mode Echo mode
Supply volume: 5 V DC Supply volume: 5 V DC
Battery operation time: up to 5-8 hours Battery operation time: up to 5-8 hours
Charging time: 6 hours Charging time: 6 hours
Charging Charging Charging
Connect USB/micro USB cable provided in the kit to a 5V DC voltage supply sour- Connect USB/micro USB cable provided in the kit to a 5V DC voltage supply sour-
ce . Network charger with USB out can be the supply source. Connect the other ce . Network charger with USB out can be the supply source. Connect the other
end of the cable to micro USB port in the microphone. Charging is signalled with end of the cable to micro USB port in the microphone. Charging is signalled with
red LED on the power switch. When fully charged, the LED goes off . When the red LED on the power switch. When fully charged, the LED goes off . When the
microphone is fully charged, disconnect it from the power supply. microphone is fully charged, disconnect it from the power supply.
Turning on Turning on Turning on
Press and hold power switch on the microphone until LED on the power switch Press and hold power switch on the microphone until LED on the power switch
is on. is on.
4 4