Turning Off; Using The Microphone - FOREVER Animal AMS-100 Manual

Turning off Turning off Turning off
Press and hold the power switch. When the power switch is released, micropho- Press and hold the power switch. When the power switch is released, micropho-
ne turns off and the LED on the power switch goes off . ne turns off and the LED on the power switch goes off .
Pairing built-in loudspeakers with a phone Pairing built-in loudspeakers with a phone
1. Turn the microphone on. 1. Turn the microphone on.
2. Start the Bluetooth module in your phone. 2. Start the Bluetooth module in your phone.
3. Find a device „AMS-100" 3. Find a device „AMS-100"
4. When pairing the devices, used may be asked to enter PIN code. Standard 4. When pairing the devices, used may be asked to enter PIN code. Standard
code is ,,0000". code is ,,0000".
Playing music on built-in loudspeakers (Bluetooth) Playing music on built-in loudspeakers (Bluetooth) Playing music on built-in loudspeakers (Bluetooth)
1. Pair the microphone with your device. 1. Pair the microphone with your device.
2. Start music application on your phone. 2. Start music application on your phone.
3. Play the music. 3. Play the music.
Track change Track change Track change
Tracks may be changed using buttons „4 „ or „5". Tracks may be changed using buttons „4 „ or „5".
Volume change Volume change Volume change
Volume may be increased by pressing and holding „4" button. Volume may be Volume may be increased by pressing and holding „4" button. Volume may be
reduced by pressing and holding „5" button. reduced by pressing and holding „5" button.
Voice modulator Voice modulator Voice modulator
Voice may be changed using button „7". Three modes : Voice may be changed using button „7". Three modes :
1. a natural voice 2. a high voice 3. a low voice 1. a natural voice 2. a high voice 3. a low voice
Listening to music from microSD/via USB Listening to music from microSD/via USB Listening to music from microSD/via USB
Insert a memory card to the TF slot or a memory stick to the USB port to listen Insert a memory card to the TF slot or a memory stick to the USB port to listen
to music. The loudspeaker will automatically switch to play mode. Removing mi- to music. The loudspeaker will automatically switch to play mode. Removing mi-
croSD card/memory stick causes return to a previous operation mode. croSD card/memory stick causes return to a previous operation mode.

Using the microphone

Using the microphone Using the microphone
After starting the device, the microphone is on by default. Voice / sound sho- After starting the device, the microphone is on by default. Voice / sound sho-
uld be directed directly to the top of the microphone, because sound sensor uld be directed directly to the top of the microphone, because sound sensor
is directional. is directional.
Recording with Audio Cable Recording with Audio Cable Recording with Audio Cable
1. Turn the microphone on. 1. Turn the microphone on.
2. Connect the Audio-in cable to micro USB port in the microphone. 2. Connect the Audio-in cable to micro USB port in the microphone.
3. Connect the other end to a sound source (mini-jack). 3. Connect the other end to a sound source (mini-jack).
4. Play the music on a device the cable is connected to, it will be played using 4. Play the music on a device the cable is connected to, it will be played using
the loudspeakers built-in in the microphone. the loudspeakers built-in in the microphone.
5. Record your singing 5. Record your singing
When connecting Audio-in cable, Bluetooth function turns automatically off . When connecting Audio-in cable, Bluetooth function turns automatically off .
EN EN
5 5