Stanley SPS-1400 Traducción De Las Instrucciones Originales página 20

G
intended use, secondary damages due to use of
B
faulty components.
Parts subject to wear
Even when used in the intended way, some
components are subject to normal wear. They have to
be replaced depending on the kind of duration of usage.
These parts include, among others, the cutting tool and
the retaining disk.
Storage/Winter
You should obverse the following steps, so that the
petrol cutting blade will work again trouble-free after a
long time:
- Empty the fuel tank.
- Start the engine and let it run, until it comes to a
stop.
- When the engine has cooled down, remove the
spark plug.
- Fill a small spoon of 2-stroke mix into the spark
plug opening, and slowly pull the starter cable
through several times. Thereby, soot deposits will
be blown out, and piston and cylinder will be
lubricated.
- Check the spark plug and replace it, when the
spark flag is burnt down too excessively.
- Store the petrol cutting blade at a dry location
where it is not subject to risk of fire.
Restart after longer Breaks
1. Remove the spark plug.
2. Pull the starter cable through quickly several
times, to remove oil and deposits in the engine
compartment.
3. Check the spark plug and replace it, if necessary, and
screw it back in again.
20
- Fill the fuel tank with a 2-stroke mix of 40:1.
- Start the engine as described in "Starting when
Engine is cold".
Specifications
Motor type:
Max. Power output:
Piston capacity:
Idle speed:
Clutch engaged speed:
Max. Engine speed:
Cutting diameter:
Specific fuel comsumption:
Tank volume:
Weight:
Line size:
Spark plug:
Sound pressure level L :
pA
96.2 dB(A), K=3 dB(A) (grass trimmer)
97.2 dB(A), K=3 dB(A) (brush cutterr)
Sound power level L :
wA
109.2dB(A),K=3dB(A) (grass trimmer)
108.4dB(A),K=3dB(A) (brush cutter)
Vibration: 8,484 m/s
6,243 m/s
Air-cooled 2-stroke engine
1,4 kW
3
51,2 cm
-1
3400 min
-1
4900 min
-1
9000 min (grass trimmer)
-1
10500 min (brush cutter)
430 mm (grass trimmer)
255 mm (brush cutter)
684 g/kWh
850 ml
7,8 kg, empty
Ø 2,4 mm
L8RTC(Torch)
2 2
K=1,5 m/s (grass trimmer)
2 2
K=1,5 m/s (brush cutter)