Archos 101 G9 Manual Del Usuario página 5

CONNECTING TO A WI-FI NETWORK
www
You need to be in a Wi-Fi zone that will allow you to connect to it. Every time the ARCHOS is in range of a network that you have
already configured once, it will attempt to make a connection.
1 To configure a new Wi-Fi network, go on the Home screen, touch the Settings icon.
2
In the Settings screen, select Wireless & networks.
If the Wi-Fi is off, touch the Wi-Fi line to turn it on.
3
Then select Wi-Fi settings.
The ARCHOS will scan for available Wi-Fi networks and display them at the
bottom of the screen.
4
Touch the network you want to connect to.
5 Enter the required network information*, and touch Connect.
We recommend that you select Show password, to be able to see the characters you are typing.
6 Your ARCHOS will now establish a connection to that Wi-Fi access point.
* For free access Wi-Fi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters) of the
type WEP, WPA, or WPA2. Check with the Internet service provider to obtain the exact connection parameters.
5
From the system bar, you can access
the Wi-Fi settings quickly.
1. Touch the time in the system bar.
2. Touch the status icons.
The status details is displayed below.
3. Touch Wi-Fi to open the Wi-Fi
settings.
For more information, see how to
configure a Wi-Fi network.