Getting Started; Power On/Off; Audio Recording - Wiseup H100 Manual Del Usuario

All manuals and user guides at all-guides.com
4. DC5V 1A Charging Adapter

Getting Started

>> Please make sure the battery is securely fitted into the battery compartment
before using.
>> Please make sure a micro SD card is properly fitted into the SD Card Slot
on your camera, as the camera will not work without a micro SD card.
>> Please make sure the battery is fully charged before using. The camera will
shut down automatically when the battery runs out of power.
>> Please make sure the Power ON/OFF Switch has been slid to the up
position (ON position).
>> Please make sure the remote control is aimed to the camera every time you
press the buttons.
Operation

1. POWER ON/OFF

a. Power on the camera by pressing Button A for 2 seconds. The Indicator
Light will illuminate red and blue for 5 seconds, and then it will be solid red,
indicating the camera has entered into standby mode.
b. Power off the camera by pressing Button A for 2 seconds. The Indicator
Light will blink blue for three times and go out.
c. In standby mode, the camera will shut down automatically in three minutes if
no operation is performed.

2. AUDIO RECORDING

a. Power on the camera by pressing Button A for 2 seconds. The Indicator
Light will illuminate red and blue for 5 seconds, and then it will be solid red,