Video Recording - Wiseup H100 Manual Del Usuario

All manuals and user guides at all-guides.com
indicating the camera has entered into standby mode.
b. Press Button B for 2 seconds. The Indicator Light will blink blue for 4 times
and go out, indicating the camera is recording audio.
c. Press Button B once to stop audio recording. The Indicator Light will be solid
red, indicating the camera is back to standby mode.

3. VIDEO RECORDING

a. Power on the camera by pressing Button A for 2 seconds. The Indicator
Light will illuminate red and blue for 5 seconds, and then it will be solid red,
indicating the camera has entered into standby mode.
b. Press Button C for 2 seconds. The Indicator Light will blink red for 3 times
and go out, indicating the camera is recording video.
c. Press Button C once to stop recording video. The Indicator Light will be solid
red, indicating the camera is back to standby mode.
[Note]:
1. The camera will save videos every 20 minutes automatically.
2. Video Format: AVI
3. Video Resolution: 1080P
4. MOTION DETECTION VIDEO RECORDING
a. Power on the camera by pressing Button A for 2 seconds. The Indicator
Light will illuminate red and blue for 5 seconds, and then it will be solid red,
indicating the camera has entered into standby mode.
b. Press Button D for 2 seconds. The Indicator Light will blink red and blue for
3 times and go out, indicating the camera has entered into motion detection
video recording mode.
c. The camera will record a one-minute video automatically once it detects a
motion. If a motion is detected, the Indicator Light will blink blue once,