Technical Specification - Elcometer 456 Manual Del Usuario

6 TECHNICAL SPECIFICATION

Elcometer 456 Waterproof Probes are Scale 2 probes with a
measuring range up to 5mm (200mils) however, for higher resolution
and accuracy on thin coatings, they can be switched to the Scale 1
mode measurement performance.
Measuring Range
Accuracy
Resolution
Minimum Substrate
Thickness
Minimum Convex
Surface Diameter
Minimum Concave
Surface Radius
Minimum Sample
Diameter
Minimum
Headroom
For the avoidance of doubt, please refer to the original English language version.
Elcometer 456 Waterproof Probes are packed in cardboard packaging. Please ensure that this packaging is
disposed of in an environmentally sensitive manner. Consult your local Environmental Authority for further
guidance.
is a registered trademark of Elcometer Limited, Edge Lane, Manchester, M43 6BU.
R
United Kingdom
All other trademarks acknowledged.
© Elcometer Limited 2008 - 2017. All rights reserved. No part of this document may be reproduced, transmitted,
transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any
means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
R
Scale 1 Mode
0 - 1500µm
(0 - 60mils)
±1-3% or ±2.5μm
(±0.1mil)
0.1μm: 0 - 100μm;
1μm: 100 - 1500μm
0.01mil: 0 - 5mils;
0.1mil: 5 - 60mils
Scale 2 Mode
0 - 5mm (0 - 200mils)
±1-3% or ±20μm
(±1.0mil)
1μm: 0 - 1mm;
10μm: 1 - 5mm
0.1mil: 0 - 50mils;
1mil: 5 - 200mils
0.3mm (12mils)
4mm (0.16")
40mm (0.98")
8mm (0.32")
138mm (5.43")
TMA-0438 Issue 04 - Text with cover 20517