VONROC TT502XX Traducción Del Manual Original página 5

TECHNICAL SPECIFICATIONS
Model No.
Max load capacity
Dimensions (folded)
Dimensions (unfolded)
Product weight
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-3.
1. Handle
2. Swivel wheels
3. Bolts
4. Load plate
5. Fixed wheels
6. Release bar
3. ASSEMBLY
Mounting the wheels (Fig. B)
1. Put the truck upside down. Put a piece of card-
board underneath, so you don't damage the
subsurface.
2. Mount the swivel wheels (2) using four bolts (3)
per wheel on the rear side, as shown on Fig. B.
3. Mount the fixed wheels (5) using four bolts (3)
per wheel on the front side, as shown on Fig. B.
4. Turn the truck over and put it on its wheels.
4. OPERATION
Unfolding for usage (Fig. C)
1. Stand behind the truck.
2. Place your foot on the release bar (6) and press
downwards.
3. Pull the handle (1) gently towards you.
4. When handle (1) is completely upright, release
the folding release bar (6).
Always check if the handle is secured
properly.
Folding for storage (Fig. C)
1. Stand behind the truck.
2. Place your foot on the release bar (6) and press
downwards.
3. Take the handle (1) and gently push away from
you.
WWW.VONROC.COM
TT502XX
150 kg
735x480x135mm
735x480x820mm
7.7 kg
4. When handle (1) is completely folded, release
the folding release bar (6).
5. MAINTENANCE
Risk of damage! Improper handlining of the
platform truck can lead to damages. Always
check product for damage before first use.
Check regularly that the platform truck is in perfect
condition, re-tighten the screws if necessary and
make sure the frame engages correctly.
Clean the product
• Never use mineral spirits, solvents or aggres-
sive cleaning agents for cleaning.
• Clean the product with a damp cloth and , if
necessary, with a mild detergent.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or improp-
erly maintained;
• Non-original spare parts have been used.
This constitutes the sole warranty made by
company either expressed or implied. There are
no other warranties expressed or implied which
extend beyond the face hereof, herein, including the
implied warranties of merchantability and fitness for
a particular purpose. In no event shall VONROC be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
EN
5