Young America SSC 1400 Instrucciones De Montaje página 13

Steps to lower the mattress:
Remove the mattress from the crib.

Loosen the (4) bolts attaching the front Base Rail.

You may have to position the Crib on its side for
easier access to the Side Rail bolts. See Figure 15.
If the Crib is on its side return it to an upright po-

sition. Loosen the (4) bolts attaching the front
Crib Side. Note: Bolts will stay with Crib Side.
See Figure 16.
Gently spread the top of the Crib Ends to allow

the Locater Pins in the Crib Ends to disengage the
holes in the ends of the Crib Side top rail. Lift up
and remove the Crib Side. See Figure 17.
Loosen the (4) bolts attaching the Mattress Plat-

form and remove the platform from the crib.
Note: Bolts will stay attached to Mattress Plat-
form. See Figure 18.
Remove the platform brackets and place in the

lower position. See Figure 19.
Refer to Step 4 on Page 9 to reassemble the crib.

Check and securely tighten all assembly bolts

with the provided wrench.
Figure 17.
Crib End
Locater Pin
Figure 18.
All manuals and user guides at all-guides.com
Lowering the Mattress Platform
Crib Side
Figure 15.
Wrench
Figure 16.
Mattress bracket
Figure 19.
13
Higher location
Lower location
Wrench